Downloads
(please read before downloading)
I have decided to post the Gerber files for the Radio Stack, Arduino Shield, GPS as well as all downloadable files on this separate site. For all the time I have been working on it, I will be charging a small amount of money for the files, the prices you will find below ( I didn't do all this work for money but money is still needed to buy all the components and all this work is time consuming ). Only for personal use, if you want to use it commercially you need to contact me first.
Be advised!
Because this is a work in progress, sometimes I can't produce and test all the PCB's that I design, which means that there may be mistakes or bugs which I try to fix as soon as I notice any, or as soon as I am made aware from someone. All the files you find below are gerber files which you needed to produce (etch yourself or let someone else do it for you) PCB's. In addition you will also need the components to solder to the PCB's in order to complete the products. You need to be careful while soldering the components, you will be dealing with very small tracks and pins which if by mistake are shortened, can cause damage to the PCB's. Also achieving the desired look with a 3D printer depends on your skills, 3D printer, the type of the filament and your 3d printer settings, which means different people achieve different results. This doesn't mean that it is difficult or complicated as I have tried to document everything as good as possible. Building the cockpit is as much fun as flying it :).
Be advised!
Because this is a work in progress, sometimes I can't produce and test all the PCB's that I design, which means that there may be mistakes or bugs which I try to fix as soon as I notice any, or as soon as I am made aware from someone. All the files you find below are gerber files which you needed to produce (etch yourself or let someone else do it for you) PCB's. In addition you will also need the components to solder to the PCB's in order to complete the products. You need to be careful while soldering the components, you will be dealing with very small tracks and pins which if by mistake are shortened, can cause damage to the PCB's. Also achieving the desired look with a 3D printer depends on your skills, 3D printer, the type of the filament and your 3d printer settings, which means different people achieve different results. This doesn't mean that it is difficult or complicated as I have tried to document everything as good as possible. Building the cockpit is as much fun as flying it :).
After completing the payment, you will get redirected to a link to download the corresponding files.
All sales are final and non-refundable. 19% TAX will be added to the price at checkout. If you have troubles downloading the files, please contact me at: flightsimalbeagle@gmail.com
All sales are final and non-refundable. 19% TAX will be added to the price at checkout. If you have troubles downloading the files, please contact me at: flightsimalbeagle@gmail.com
Radiostack V3.2.1
€10.00 Gerber files including CAD and .STL files. |
Radiostack V3.2.1 + GPS V3.2.3
€15.00 Gerber files including CAD and .STL files. |
Radiostack GMA 345
€15.00 Gerber files including CAD and .STL files. |
Airbus A320 FCU V1.7
€10.00 Gerber files including .CAD, .STL and Airbus A320 FBW config files. |
Airbus A320 EFIS V1.7.1
€10.00 Gerber files including .CAD, .STL, BOM and Pinout files. |
Airbus A320 FCU V1.7 + EFIS V1.7.1
€15.00 Gerber files including .CAD, .STL and Airbus A320 FBW config files. |
Airbus A320 FCU + EFIS V2.5 with KAV displays
€15.00 Gerber files including .CAD and Airbus A320 FBW config files |
3D Printed Yoke & Throttle
€7.00 .STL files. |
3D Printed Ruder Pedals
€7.00 .STL files. |
Baron 58
€15.00 Gerber files including CAD files and faceplate .STL files. |
Boeing 737 MCP V1.6
€10.00 Gerber files including .CAD and .STL files. |
GPS V3.2.3 (Aruino Pro Micro)
€5 Gerber files including ,CAD and .STL files. |
3D Printed Cessna 172 NAV/GPS Annunciator
€4.00
STL files.
€4.00
STL files.
All files
€40.00
All files in one place, including Gerber, .CAD, and .STL files
€40.00
All files in one place, including Gerber, .CAD, and .STL files
Or pay with Credit card below:
|
|
If you don't get a link after paying, please just contact me at fatmirh@hotmail.com and I will send you a link to download the files.
2015, Copyright AlbEAGLE